Contact the Toolmaker Hotline

• Phone: +49 8191 968-120
• E-mail: hotline@toolmaker.de

Sending an SPLF in *ORIGinal format by mail

If a Hotline representative asks you to send an SPLF in its original format, then ge proceed as follows:

1. WRKMBX
   1. Select 8 for a mailbox that works (from which you can send something)
2. F6 (Create)
   1. To hotline@toolmaker.de
   2. Subject: Tractel SPLF
   3. F10 (Attachments)
3. Select 2nd spool files
   1. Select the correct one with 1
   2. Important: Select output format *ORIG

4. In the "Work with attachments" display - press F3

5. In display "DirectMail/400 - Edit mail" - Press F3

6. In the "Send mail" display

a Save e-mail = Y

b Send e-mail = Y

c Enter

After that, please check if the mail went out

7. Selection 1 for ". Sent"

a If you find the mail in the list, then all is well